Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
121
Modem > Dialup Profiles > Modem Profile Configuration
8
Click the ISP Address tab.
9
In the ISP Address Setting section, select Obtain an IP Address Automatically if you do not
have a permanent dialup IP address from your ISP. If you have a permanent dialup IP address
from your ISP, select Use the following IP Address and enter the IP address in the
corresponding field.
10
If you obtain an IP address automatically for your DNS server(s), select Obtain an IP Address
Automatically. If your ISP has a specific IP address for the DNS server(s), select Use the
following IP Address and enter the IP address of the primary DNS server in the corresponding
field. You can also add a secondary DNS server address in the field below.
11
Click on the Location tab. Use the settings in the page to configure modem dialup behavior.
In the Dial Type menu select one of the following options:
• Persistent Connection - By selecting Persistent Connection, the modem stays connected
unless you click the Disconnect button on the Network > Settings page. If Enable WAN Failover is
selected on the Modem>Failover page, the modem dials automatically when a WAN connection
fails. If the Primary Profile cannot connect, the modem uses the Alternate Profile 1 to dial an
ISP.