Filter
Top Products
192
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
C
HAPTER
33:
Configuring Custom Services
1
Click Add. The Add Service window is displayed.
2
Enter the name of the service in the Name field.
3
Enter the port number or numbers that apply to the service in the Port Range fields. A list of well
know port numbers can be found in any networking reference.
4
Select the type of protocol, TCP, UDP, or ICMP from the Protocol menu.
5
Click OK. The service appears in the User Defined (Custom) Services table.
Predefined Services
The Predefined Services table lists are the services that are predefined in the SonicWALL security
appliance. You cannot delete any of these predefined services.
The Predefined Services table displays the following information about each predefined service:
• Name - the name of the service
• Port Start - the beginning port number associated with the service
• Port End - the ending port number associated with the service
• Protocol - the protocol the service is associated with: TCP, UDP, ICMP or IPSEC-ESP
• Enable Logging - checked, the service traffic is logged by the SonicWALL security appliance
event log. Unchecked, the service traffic is not logged.