Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
175
WGS > Accounts
To configure routing on the TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless to support the above
example, click Network and then Routing.
1
Under Default Route, click Configure. The Edit Default Route window is displayed.
2
Enter the IP address in the Default Gateway field, and then select LAN, WAN, or WLAN from the
Interface menu.
3
Click OK. The default gateway is now configured.
Secure Access Point with Wireless Guest Services
If simultaneous Wireless Guest Services support is a requirement, then access to the 172.16.31.x
network is necessary. The following diagram portrays such a configuration, and also allows for an
introduction to one of the WGS enhancements of SonicOS 2.0, explicit WGS allow and deny lists.