Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
183
Firewall > Access Rules
5
Select Allow action to allow the service to the network, or select Deny to disallow the service to
the network.
6
Enter a value in minutes in the Inactivity Timeout (minutes) field. The default value is 5 minutes.
Click Next.
7
Select the source interface of the service from the Interface menu. If you want to allow or deny the
service from the Internet, select WAN. To allow or deny the service from any source, select * from
the Interface menu.
8
If you have a range of IP addresses, enter the first one in the IP Address Begin field. If you do not
want to specify an IP address, enter “*” in the IP Address Begin field. By typing * (asterisk) in the
field, all traffic using the service is either allowed or denied to all computers on the network. Click
Next.
9
Select the destination interface of the service from the Interface menu. If you have a range of IP
addresses, enter the first one in the IP Address Begin field. If you do not want to specify an IP