Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
21
Using the SonicWALL Setup Wizard
Configuring WiFiSec - VPN Client User Authentication
8
WiFiSec and Group VPN are automatically enabled on the security appliance using the default
settings associated with each feature. To add a user with VPN Client privileges, type a user name
and password in the User Name and Password fields. When users access the security appliance
using the VPN client, they are prompted for a user name and password. Click Next.
Configuration Summary
9
The Configuration Summary page displays all of the settings configured using the Deployment
Scenario Wizard. To change any of the settings, click Back until you see the settings you want to
change. To apply the current settings to the security appliance, click Apply.
Storing Configuration
10
Wait for the settings to take effect on the security appliance.
Congratulations!
When the settings are applied to the security appliance, the Congratulations page is displayed. Click
Restart to complete the configuration.
Configuring the TZ 50 Wireless/TZ 150 Wireless/TZ 170
Wireless as a Guest Internet Gateway
Configure your wireless security appliance to provide guests controlled wireless access to the Internet
only.
Log into the SonicWALL TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless using your administrator’s
name and password. Click Wizards in the top right corner of the System > Status page.
Welcome to the SonicWALL Setup Wizard
1
To begin configuration, select Setup Wizard and click Next.
Selecting the Deployment Scenario
2
Select Guest Internet Gateway as the deployment scenario. Click Next.
Changing the Password
3
Type a new password in the New Password field. The password should be a unique combination
of letters, or number, or symbols, or a combination of all three for the most secure password. Avoid
names, birthdays, or any obvious words. Retype the password in the Confirm field. Click Next.
Selecting Your Time Zone
4
Select your Time Zone from the Time Zone menu. The security appliance uses an internal clock to
timestamp logs and other functions requiring time. Click Next.
Configuring the WAN Network Mode
5
Confirm that you have the proper network information necessary to configure the SonicWALL
security appliance to access the Internet. Click the hyperlinks for definitions of the networking
terms.
You can choose:
Static IP, if your ISP assigns you a specific IP address or group of addresses.
DHCP, if your ISP automatically assigns you a dynamic IP address.