Filter
Top Products
140
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
C
HAPTER
23:
Configuring Wireless Settings
Note: WPA support is only available in Access Point Mode. WPA support is not available in Bridge
Mode.
Wireless Settings
Enable WLAN Radio: Enable the TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless radio for wireless
connections.
Use Time Constraints: Only enable the radio during the times you specify.
WiFiSec Enforcement: Select this setting to provide IPSec-based VPN on a WLAN. If selected,
wireless clients must download a copy of the Global VPN Client software to install on their computer.
You must also configure and enable the Group VPN Security Association. When the Require
WiFiSec for Site-to-Site VPN Tunnel Traversal setting is enabled, any wireless traffic destined for a
remote network with a VPN tunnel is secured by WiFiSec. The Require WiFiSec for Site-to-Site
VPN Tunnel Traversal checkbox is enabled by default.
When the Enable WiFiSec Service Exception List setting is enabled, serrvices you specify in the
WiFiSec exception list do not require WiFiSec to connect. To configure the WiFiSec exception list:
1
Click Configure next to Enable WiFiSec Service Exception List.
2
In the WiFiSec Service Exception List window, select the services you want to exclude in the
Services column.
3
Click the button to move the services into the WiFiSec Service Exception List
column.
4
When you have the list elements you want, click OK.
WLAN IP Address/WLAN Subnet Mask: You can configure a different IP address for the WLAN by
typing another private IP address in the WLAN IP Address field. Type the subnet in the Subnet Mask
field. Click Apply for the changes to take effect on the SonicWALL.
SSID: The default value, sonicwall, for the SSID can be changed to any alphanumeric value with a
maximum of 32 characters.
Radio Mode: Select your preferred radio mode from the Radio Mode menu. The TZ 50 Wireless/TZ
150 Wireless/TZ 170 Wireless supports the following modes:
• 2.4GHz 802.11b/g Mixed - Supports 802.11b and 802.11g clients simultaneously. If your wireless
network comprises both types of clients, select this mode.