Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
217
Site to Site VPN Configurations
Qualified Domain Name of the remote destination in the IPSec Gateway Name or Address field.
Click Next.
4
Enter the IP address of the network protected by the remote SonicWALL in the Remote Network
field. This is a private IP address on the remote network. Enter the subnet mask in the Remote
Netmask field. Click Next.
5
Enter a shared secret in the Shared Secret field. Use a combination of letters and numbers to
create a unique secret. Click Next.
6
To enable the VPN policy immediately, click Apply. If you prefer to disable the policy initially,
select Create this Policy Disabled, and then click Apply.
Creating a Custom VPN Policy IKE with Preshared Secret
To create a custom VPN policy using IKE and a Preshared Secret, follow these steps:
1
Click VPN Policy Wizard to launch the wizard. Click Next to continue.
2
Select Custom, and click Next.
3
Enter a name for the policy in the Policy Name field. You may want to use the name of a remote
office or other identifying feature so that it is easily identified. Enter the IP address or Fully