Filter
Top Products
202
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
C
HAPTER
36:
Configuring VPN Settings
VPN > Settings
The VPN > Settings page provides the SonicWALL features for configuring site-to-site VPN
connections and client VPN connections.
The GroupVPN policy is automatically enabled and ready to use for supporting remote SonicWALL
Global VPN Clients.
VPN Global Settings
The Global VPN Settings section displays the following information:
• Enable VPN must be selected to allow VPN policies through the SonicWALL.
• Unique Firewall Identifier - the default value is the serial number of the SonicWALL. You can
change the Identifier, and use it for configuring VPN tunnels.
VPN Policies
All existing VPN policies are displayed in the VPN Policies table. Each entry displays the following
information:
• Name - user-defined name to identify the Security Association.
• Gateway - the IP address of the remote SonicWALL. If 0.0.0.0 is used, no Gateway is displayed.
• Destinations - the IP addresses of the destination networks.
• Crypto Suite - the type of encryption used
• Enable - selecting the check box enables the VPN Policy. Clearing the check box
disables it.
• Configure - edit or delete the VPN Policy information. GroupVPN has a Disk icon for
exporting the configuration for SonicWALL Global VPN Clients.
The number of VPN policies defined, policies enabled, and the maximum number of Policies allowed
is displayed below the table.