Filter
Top Products
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
131
Using the Wireless Wizard
Using the Wireless Wizard
You can use the Wireless Wizard to quickly and easily set up your wireless network. Log into the TZ
50 Wireless/TZ 150 Wireless/TZ 170 Wireless, and click Wireless on the menu bar. Click Wireless
Wizard to launch the wizard and begin the configuration process. Or click Wizards, and select
Wireless Wizard.
Welcome to the SonicWALL Wireless Configuration Wizard
1
When the Wireless Wizard launches, the Welcome page is displayed. Click Next to continue
configuration.
WLAN Network Settings
2
Select the Enable WLAN check box to activate the wireless feature of the TZ 50 Wireless/TZ 150
Wireless/TZ 170 Wireless. Use the default IP address for the WLAN or choose a different private
IP address. The default value works for most networks. The Enable Windows Networking
Support between LAN and WLAN to allow wireless clients to access your Windows network
resources, such as shared folders and printers. Click Next to continue.
S
Alert: You cannot use the same private IP address range as the LAN port of the TZ 50 Wireless/TZ
150 Wireless/TZ 170 Wireless.