Filter
Top Products
2 - 1
2 SYSTEM CONFIGURATION
2. SYSTEM CONFIGURATION
This section describes the Q173CPU(N)/Q172CPU(N) system configuration,
precautions on use of system and configured equipments.
2.1 Motion System Configuration
This section describes the equipment configuration, configuration with peripheral
devices and system configuration in the Q173CPU(N)/Q172CPU(N) system.
(1) Equipment configuration in Q173CPU(N) system
Q173CPU(N) System configuration
Is this system
continuously power off for 1000
hours or more running?
Should the
dividing unit be used to divide
SSCNET Lines?
YES
NO
YES
YES
YES
YES
YES
NO
NO
NO
NO
(Note)
Refer to equipment configuration of "(a) When using
the Dividing unit/external battery".
Note : Set the battery (A6BAT/MR-BAT) to the Dividing
unit (Q173DV).
Refer to equipment configuration of "(a) When using
the Dividing unit/external battery".
Refer to equipment configuration of "(a) When using
the Dividing unit/external battery".
NO
Refer to equipment configuration of "(b) When using
the Dividing cable".
Note : Use a Q173J2BCBL M/Q173HBCBL M.
Refer to equipment configuration of "(b) When using
the Dividing cable".
Note : Use a Q173J2B2CBL M/Q173HB2CBL M.
Use a Q173CPUN-T.
Refer to equipment configuration of "(b) When using
the Dividing cable".
Note : Use a Q173J2B4CBL M/Q173HB4CBL M.
(Note) : Continuous power failure time which can be backed up on the internal rechargeable battery
is different depending on the charge time. It is possible to continuously power off for 1100
hours because of char
g
e of 40 hours. Refer to the section 2.4.1
(
8
)
for details.
Is the type
of the amplifier used at 1st axis
of each SSCNET system
the same?
Is only 1st
SSCNET system used?
Is 1st and 2nd
SSCNET system used?
Is the teaching unit used?
2