Filter
Top Products
6 - 28
6 INSPECTION AND MAINTENANCE
6.7 Confirm method of Error Code
When an error occurs, the error code and error message can be read by the personal
computer(IBM PC/AT) installation of the SW6RN-GSV
P.
The procedure for reading error codes by the SW6RN-GSV
P is as follows.
(1) Start the SW6RN-GSV
P.
(2) Connect the Motion CPU to the personal computer(IBM PC/AT) .
(3) Select [ Create a new project ] - [ Motion CPU Read ] Menu by the SW6RN-
GSV
P, and also read the project data from the Motion CPU.
(4) Select the [ Monitor ] - [ PV Enlarged Monitor ] Menu.
(5) Confirm the error code and error message that is displayed on the screen.
For details of the SW6RN-GSV
P operating method, refer to help of each
programming software package.