Filter
Top Products
26
Epsilon EP-I Indexing Drive and FM-2 Indexing Module Reference Manual
Outputs View
This view is divided into two windows. The “Output Function” window, on the left side, displays the available output
functions. The “Output Line” window, on the right side, displays the output lines, the attached output function and the line
configuration (Active Off).
Figure 18: Outputs View for a Epsilon EP-I Drive
Note
For wiring information, refer to the “Installation” section of the Epsilon EP Installation Manual (P/N 400518-01), or the
Modular Drive System Reference Manual (P/N 400525-01).
Output Function Window
This window allows selection of the output function to be assigned to an output line.
To assign an output function, position the mouse pointer over the function on the left to assign it to the line on the right. Press
the left mouse button while over the function, and hold the button down. While holding the left button down, drag the function
until the pointer is positioned over the desired line and release the left mouse button.
To unassign an output function, position the pointer over the function on the left. Press the left mouse button while over the
function, and hold the button down. While holding the left button down, drag the function over to the right and release the
left mouse button.
Output Lines Window
Attached Function
This feature displays the Output Function assigned to each particular Output Line.
Configuration
The configuration of each output line is displayed nest to the output line when the active state is changed from default. The
default configuration is Active On, see Active Off check box below.