Filter
Top Products
EPL Commands
B
58
14245L-003 Rev. A EPL Programming Guide 12/16/13
B
RSS-14 Bar Code Specific Options
Description Use this command to print RSS-14 bar code family bar codes for numeric data.
The printer supports a subset of the RSS bar code family set. The subset includes basic RSS-
14, RSS Limited, RSS Stacked and RSS Truncated. The printer does not support RSS
Expanded or two dimensional composite bar codes.
Printer Models: G-Series, 3842*, and 2844*
* Available as a firmware download from the www.zebra.com website.
Syntax Bp
1
,p
2
,p
3
,p
4
,p
5
,p
6
,p
7
,p
8
,”DATA”
Parameters This table identifies the parameters for this format:
Parameters Details
p
1
= Horizontal start
position
Horizontal start position (X) in dots.
p
2
= Vertical start position
Vertical start position (Y) in dots.
p
3
= Rotation Accepted Values:
0 = normal (no rotation)
1 = 90 degrees
2 = 180 degrees
3 = 270 degrees
p
4
= RSS-14 Bar Code
selection
p
5
= Narrow bar width
Narrow bar width in dots.
Accepted Values: 1-10
The narrowest module will be this number of dots.
Symbol Width is the value of p
5
times the applicable bar code
Width Multiplier listed in the table for the selected RSS-14
bar code type (p4). This overall symbol width value includes
the required symbol "quite zone".
p
6
= Wide bar width
Wide bar width in dots.
Accepted Values: 2
p
7
= Bar code height
Bar code height in dots.
Value Description
Width
Multiplier
Min. Height
Multiplier
R14 Basic RSS-14 96 33
RL Limited 74 10
RS Stacked 50 13
RT Truncated 96 13