Filter
Top Products
SGD Wireless Commands
wlan.wep.key4
312
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.wep.key4
Description This printer setting refers to the fourth indexed WEP encryption key. The WEP
encryption key is a hexadecimal string value. This key should match the wireless network
WEP encryption key 4. For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer respond with the encryption key.
Format: ! U1 getvar "wlan.wep.key4"
For protection a single "*" prints.
setvar
This command instructs the printer to set the encryption key.
Format: ! U1 setvar "wlan.wep.key4" "value"
Va lues:
10 hexadecimal characters for 40-bit encryption
26 hexadecimal characters for 128-bit encryption
Default: All zeros
Example • This setvar example shows the value set to "A1B2C3D4F5".
! U1 setvar "wlan.wep.key4" "A1B2C3D4F5"
When the setvar value is set to "A1B2C3D4F5", the getvar result is "*".