Filter
Top Products
199
SGD Printer Settings
ip.snmp.get_community_name
12/16/13 EPL Programming Guide 14245L-003 Rev. A
ip.snmp.get_community_name
Description This printer setting is used when making SNMP queries. The SNMP client
must supply the get community name that matches the printer’s get community name in order
to query any SNMP data. For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 638.
Commands Details
getvar
This command instructs the printer to get the SNMP get community name
string.
Format: ! U1 getvar "ip.snmp.get_community_name"
For protection a single "*" prints.
setvar
This command instructs the printer to set the SNMP get community name
string.
Format:
! U1 setvar "ip.snmp.get_community_name" "value"
Va lues: A maximum of 19 alphanumeric characters.
Default: "public"
Example • This setvar example shows the value set to "public".
! U1 setvar "ip.snmp.get_community_name" "public"
When the setvar value is set to "public", the getvar result is "*".