Filter
Top Products
125
EPL Commands
oE
12/16/13 EPL Programming Guide 14245L-003 Rev. A
oE
Line Mode Font Substitution
Description This command is a Page Mode (EPL2) command that allows the printer to set
alternate Line Mode font character sets. The fonts are activated by the oE command and are
intended for EPL1 emulation.
Mobile printers, such as the TR 220, ignore this command.
Syntax oEp
1
,p
2
,p
3
,p
4
,p
5
Parameters This table identifies the parameters for this format:
• Parameters p1-p5 are preloaded soft fonts.
• Parameters p1-p5 must be all be lower case alpha soft fonts. See the ES command
on page 93 for more details on soft fonts.
• The EPL2 font sets 2 & 4 can be restored as the default Line Mode fonts by sending the o
command without a parameter.
Parameters Details
p
1
= 5 x 7 bitmap font
5 x 7 bitmap font - Normal (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character area is 8 x 11 dots
p
2
= 5 x 7 bitmap font
5 x 7 bitmap font - Bold (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character area is 8 x 11 dots
p
3
= 5 x 7 bitmap font
5 x 7 bitmap font - Doubled (CCSET4)
Line Mode EPL1 Compatibility Font A0
Total character size is 8 x 11 dots
p
4
= 14 x 22 bitmap font
14 x 22 bitmap font - (CCSET1)
Line Mode EPL1 Compatibility Font A
Total character area is 16 x 26 dots
p
5
= 10 x 18 bitmap font
10 x 18 bitmap font - (CCSET3)
Line Mode EPL1 Compatibility Font A
Total character area is 12 x 22 dots