Filter
Top Products
EPL Commands
oM
128
14245L-003 Rev. A EPL Programming Guide 12/16/13
oM
Disable Initial Esc Sequence Feed
Description This command disables the automatic label calibration routine executed by the
printer upon receiving the first escape command sequence from the Windows printer driver.
The printer normally measures a single label and sets the top of form prior to printing the first
label after a power-up reset. The Windows™ printer driver issues escape sequences when
printing.
This command’s primary use is to save preprinted forms such as serialized labels, tags or
tickets.
Mobile printers, such as the TR 220, ignore this command.
Syntax oM
This command must be issued prior to printing with the Windows driver’s or any other
Escape (esc) mode printing operation.
To reinitialize label calibration, issue a o (111 dec. or 6F hex.) command.
Parameters There are no parameters for this format.