Filter
Top Products
121
EPL Commands
M
12/16/13 EPL Programming Guide 14245L-003 Rev. A
M
Memory Allocation
Description Printers except LP 2348 and LP 2348 Plus, with firmware version 4.32 and
above ignore this command. Use this command to set the size of form memory. The reminder
of the form storage memory will be shared by soft fonts and graphics data.
Syntax Mp
1
,p
2
,p
3
Parameters This table identifies the parameters for this format:
If the M command is issued, then all three parameters must be present.
Parameters Details
p
1
= Parameter ignored
Parameter ignored, but required to process. Represents Image
buffer size in whole KBytes.
p
2
= Form(s) memory size
Form(s) memory size in whole KBytes. The parameter, p2
(form memory size), inversely effects the size of the shared
graphics/soft fonts memory.
p
3
= Parameter ignored
Parameter ignored, but required to process. Graphics (and soft
font) memory size in whole Kbytes.
Note • Available memory and the current allocation of memory can be displayed with the U
command or an AutoSense procedure, see the printer’s user manual for details.