Filter
Top Products
SGD Wireless Commands
wlan.kerberos.username
290
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.kerberos.username
Description This printer setting refers to the Kerberos user name. The user name must
correspond to a user profile established on the Kerberos KDC server in use. For printer
support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the current Kerberos
user name.
Format: ! U1 getvar "wlan.kerberos.username"
setvar
This command instructs the printer to change the Kerberos user name.
Format: ! U1 setvar "wlan.kerberos.username" "value"
Va lues: 0-32 alphanumeric characters
Default: "user"
Example • This setvar example shows the value set to "user".
! U1 setvar "wlan.kerberos.username" "user"
When the setvar value is set to "user", the getvar result is "user".