Filter
Top Products
267
SGD Wireless Commands
wlan.associated
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.associated
Description This command refers to if the printer is or is not associated with an access point
(AP). For printer support, see SGD Command Support on page 315.
Type getvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with yes or no, which
identifies if it is associated with the AP.
Format: ! U1 getvar "wlan.associated"
Example • In this example, the getvar result is "yes".
! U1 getvar "wlan.associated"