Filter
Top Products
12/16/13 14245L-003
3
Printer Configuration
This section covers interpreting your printer’s configuration setup and setting basic modes. To
determine your printer’s configuration and operating mode, do one of the following:
• Print a configuration label using the control panel.
• Print a configuration label by sending the U command to the printer.
• Use the AutoSense feature.
The primary functions that AutoSense provides are:
• adjustment of the Media Sensor in the printer to the media in use
• the programming mode — page (EPL2) or line (EPL1 emulation) mode.
• the printer’s serial interface settings
• the printer’s configuration status including printer options
Note • The AutoSense feature and Line Mode are not available for all printer models.
Refer to your printer’s user guide for specific feature information.