Filter
Top Products
259
SGD Wireless Commands
ip.dhcp.cid_suffix
12/16/13 EPL Programming Guide 14245L-003 Rev. A
ip.dhcp.cid_suffix
Description This printer setting defines the unique suffix to be used as the client identifier
(DHCP option 61) if DHCP is enabled and "ip.dhcp.cid_type" is set to "0" or "2".
For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the client identifier
suffix.
Format: ! U1 getvar "ip.dhcp.cid_suffix"
setvar
This command instructs the printer to change the CID value.
Format: ! U1 setvar "ip.dhcp.cid_suffix" "value"
Va lues: The maximum length of a value allowed is 60 ASCII characters
when the CID type is ASCII, or 120 hexadecimal values when the CID
type is hexadecimal.
Default Value: ""
Example • This setvar example shows the value set to "printer".
! U1 setvar "ip.dhcp.cid_suffix" "printer"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"printer".