Filter
Top Products
227
SGD Wired Commands
external_wired.ip.port
12/16/13 EPL Programming Guide 14245L-003 Rev. A
external_wired.ip.port
Description This printer setting refers to the external wired print server’s port number that
the TCP print service is listening on. Normal TCP communications from the host should be
directed to this port. For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 216.
Commands Details
getvar
This command instructs the printer to respond with the external wired
printer server’s TCP/UDP port number.
Format: ! U1 getvar "external_wired.ip.port"
setvar
This command instructs the printer to set the external wired print server’s
TCP/UDP port number.
Format: ! U1 setvar "external_wired.ip.port" "value"
Va lues: 1 - 65535 (excluding any ports currently used by other services,
such as 21, 23, 80, and 515).
Default: "9100"
Example • This setvar example shows the value set to "9100".
! U1 setvar "external_wired.ip.port" "9100"
When the setvar value is set to "9100", the getvar result is "9100".