Filter
Top Products
SGD Printer Settings
ip.pop3.username
194
14245L-003 Rev. A EPL Programming Guide 12/16/13
ip.pop3.username
Description This printer setting refers to the POP3 user name. This only applies if the
"ip.pop3.enable" is set to on. For printer support, see SGD Command Support
on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 638.
Commands Details
getvar
This command instructs the printer to respond with the POP3 user name.
Format: ! U1 getvar "ip.pop3.username"
setvar
This command instructs the printer to change the POP3 user name.
Format: ! U1 setvar "ip.pop3.username" "value"
Va lues: A maximum of 20 alphanumeric characters
Default: " "
Example • This setvar example shows the value set to "user".
! U1 setvar "ip.pop3.username" "user"
When the setvar value is set to "user", the getvar result is "user".