Filter
Top Products
25
Introduction
Sending Command Programming Files to the Printer
12/16/13 EPL Programming Guide 14245L-003
Sending Command Programming Files to the Printer
Page Mode programming files can be sent to the printer from Windows operating systems by
using the Zebra Firmware Downloader (found on the user’s CD or at www.zebra.com. In the
DOS enviroment, use the Copy command at the command prompt. The easiest method is to
use the Zebra Firmware Downloader to transfer files to the printer.
Transferring files with the Firmware Downloader
1. Install the printer. Verify communication is working properly by printing a Printer
Configuration or Test using the printer's driver properties window. See Sending
Commands Directly to the Printer on page 23 for more details.
2. Install the Zebra Firmware Downloader on your system.
3. Select Start > Programs > Zebra > Firmware Downloader.
4. From the Printer menu, select Auto-Detect.