Filter
Top Products
Print Meter for 2746e and G-Series
EPL2 Odometer Commands
328
14245L-003 EPL Programming Guide 12/16/13
EPL2 Odometer Commands
The print odometer data is accessed and controlled via EPL2 Page Mode programming
commands. The odometer commands are:
URH command - Prints or reports via serial or USB interfaces a print head history report for
up to ten print heads.
URL command - Prints or reports via serial or USB interfaces the current print head or total
print distance of media run on the printer.
URR command - Prints or reports via serial or USB interfaces a Print Head Life Reminder
status report. The report may include a custom message stored by the oL command, to be
displayed when a reminder is issued (default is PRINTHEAD LIFE EXCEEDED), the
distance needed to activate print head life reminder (warning) label, and the frequency of
reminder labels after the reminder is on and in effect.
oL, oLn and oLy commands - Set and control the print head life (exceeded) reminder
label’s parameters and reporting status. See the URR command description, above.