Filter
Top Products
Print Meter for 2746e and G-Series
URH
332
14245L-003 EPL Programming Guide 12/16/13
URH
Print Head History Report
Description Use this command to print or report (via the serial or USB interface) a print
head history report of the distance printed by the last twenty (20) recorded print heads or the
last ten (10) recorded print heads if the RTC is in use.
Syntax URH[p
1
,p
2]
Parameters This table identifies the parameters for this format. Parameters are optional and
maybe entered and any order.
Parameters Details
p
1
= Report Method
(device)
Sends information back to the host via the serial port and the
last active bi-directional interface.
p = Printer
s = Serial
Default Value: s
p
2
= Units
m = Millimeters
i = Inches
Example • (default)
For units with the RTC option installed: The **SERIAL NUMBER MISMATCH ** line
prints when the serial number stored in the RTC does not match the serial number stored on
the printer’s main PCBA. One or both the PCBA or RTC has been changed in this unit and
the odometer data does not accurately represent printer usage.
The last print head record does not include the number of days in service.
Note • Depending on your printer model, your printout may vary from this example.
)&"%-*'&)*4503:'034/9999999999
4&3*"-/6.#&3.*4."5$)
%*45"/$&
999999999<999EBZT>
999999999<999EBZT>
999999999<999EBZT>
999999999