Filter
Top Products
SGD Wireless Commands
ip.dhcp.cid_prefix
258
14245L-003 Rev. A EPL Programming Guide 12/16/13
ip.dhcp.cid_prefix
Description This printer setting defines the prefix to be prepended to the DHCP client
identifier (option 61) when DHCP is enabled and "ip.dhcp.cid_type" is set to "0"or
"2". For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the client identifier
prefix.
Format: ! U1 getvar "ip.dhcp.cid_prefix"
setvar
This command instructs the printer to change the CID prefix.
Format: ! U1 setvar "ip.dhcp.cid_prefix" "value"
Va lues: Any text string up to 10 characters if the CID type is ASCII, or
20 characters if the CID type is hexadecimal.
Default Value: ""
Example • This setvar example shows the value set to "PRT001".
! U1 setvar "ip.dhcp.cid_prefix" "PRT001"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"PRT001".