Filter
Top Products
SGD Wireless Commands
wlan.tx_power
304
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.tx_power
Description This printer setting refers to specifying the wireless transmit power. For printer
support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the wireless transmit
power.
Format: ! U1 getvar "wlan.tx_power"
setvar
This command instructs the printer to set the wireless transmit power.
Format: ! U1 setvar "wlan.tx_power" "value"
Va lues: Decimal values of 1, 5, 20, 30, 50, 100
Default: "100"
Example • This setvar example shows the value set to "100".
! U1 setvar "wlan.tx_power" "100"
When the setvar value is set to "100", the getvar result is "100".