Filter
Top Products
277
SGD Wireless Commands
wlan.ip.dhcp.cid_suffix
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.ip.dhcp.cid_suffix
Description This printer setting defines the unique suffix to be used as the client identifier
(DHCP option 61) if DHCP is enabled on the wireless print server and
"wlan.ip.dhcp.cid_type" is set to "0" or "2". For printer support, see SGD
Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the client identifier
suffix on the wireless print server.
Format:
! U1 getvar "wlan.ip.dhcp.cid_suffix"
setvar
This command instructs the printer to change the client identifier suffix
value on the wireless print server.
Format:
! U1 setvar "wlan.ip.dhcp.cid_suffix" "value"
Va lues: The maximum length of a value allowed is 60 ASCII characters
when the CID type is ASCII, or 120 hexadecimal values when the CID
type is hexadecimal.
Default Value: ""
Example • This setvar example shows the value set to "printer".
! U1 setvar "wlan.ip.dhcp.cid_suffix" "printer"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"printer".