Filter
Top Products
SGD Wireless Commands
wlan.username
306
14245L-003 Rev. A EPL Programming Guide 12/16/13
wlan.username
Description This printer setting refers to the generic user name that is used by the wireless
securities that need a user name. For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Important • Kerberos has its own user name field.
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with a generic user name for
the wireless securities that need a user name.
Format: ! U1 getvar "wlan.username"
setvar
This command instructs the printer to set a generic user name for wireless
securities that need a user name.
Format: ! U1 setvar "wlan.username" "value"
Va lues: A maximum of 32 alphanumeric characters
Default: "user"
Example • This setvar example shows the value set to "user".
! U1 setvar "wlan.username" "user"
When the setvar value is set to "user", the getvar result is "user".