Filter
Top Products
295
SGD Wireless Commands
wlan.private_key_password
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.private_key_password
Description This printer setting allows the setting of the optional private key password. For
printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the value of the private
key password.
Format: ! U1 getvar "wlan.private_key_password"
For protection a single "*" prints.
setvar
This command instructs the printer to set the private key password.
Format: ! U1 setvar "wlan.private_key_password"
"value"
Va lues: A maximum of 32 alphanumeric characters
Default: ""
Example • This setvar example shows the value set to "password".
! U1 setvar "wlan.private_key_password" "password"
When the setvar value is set to "password", the getvar result is "*".