F3200 Installation & Programming Manual Document No: LT0122
Applications
Page 9-8 5 July 2001 Issue 2.7
CIRCUITS & ZONES (CONTINUED)
Note that the logic requested for the LEDs in Option B is as follows:
LEDs OUTPUTS
RUN FAULT STOPPED OC1 OC2
off off on off off
on x off on x
x on x x on
Where x = off or on (don't care).
9.1.5 AS1668 CONTROL MODULE & DRAWINGS
The following drawings are of 4 typical configurations using the AS1688 Control Module,
1945-1.
Circuit 1 uses Module Type 1 (KT0111)
Circuit 2 uses Module Type 2 (KT0112)
Circuits 3 and 4 both use Module Type 3 (KT0113), with selective "snipping" out of
components as required.
1945-1-1, AS1668 CONTROL MODULE, CIRCUIT 1
1945-1-2, AS1668 CONTROL MODULE, CIRCUIT 2
1945-1-3, AS1668 CONTROL MODULE, CIRCUIT 3
1945-1-4, AS1668 CONTROL MODULE, CIRCUIT 4