Reference, Installation, and Operations Manual Section 3: Installation
3-9000-743 Rev S June 2013
Wiring and Connections 61
Alternately, when using Daniel MeterLink with the Ethernet port, use Ethernet cable (Daniel
P/N 3-3400-079) to connect the PC to the meter as described in Section 5.4.3.
Figure 3-14 Field Connection Board Ethernet Connector Wiring
Figure 3-15 Port B Switch S1 Ethernet Settings
Table 3-8 J2 Power
Power and Communications Field Connection Board Wiring
J2 Power
Pin
1 10.4 - 36 VDC+
2 10.4 - 36 VDC Return
J18
J7
S1
J5
J8
J6
J4
J3
Note
-
Switch positions shown
are factory default settings
S2
J2