Filter
Top Products
Reference, Installation, and Operations Manual Section 5: Startup and meter configuration
3-9000-743 Rev S June 2013
Communications 97
531
Section 5: Startup and meter configuration
5.1 Communications
This section provides instructions and guidelines for communicating with and configuring the
meter, performed either as part of meter installation or as needed for meter operations
adjustment.
Instructions are provided for establishing initial communications with the meter, in order to
begin meter configuration using Daniel MeterLink software.
The most significant portion of this section consists of guidelines for configuring flow meter
parameters, or data points.
Refer to Appendix C to upgrade a Mark II meter to a Daniel Mark III Ultrasonic Gas Flow Meter
Electronics meter using the Daniel MeterLink configuration conversion feature.
Refer to Refer to HART® Field Device Specification Guide: Daniel GAS Ultrasonic Flow Meters
P/N 3-9000-754 for communications with the Series 100 Plus Option Board.
UNAUTHORIZED ACCESS, DATA LOSS, OR SYSTEM CORRUPTION MAY OCCUR
Restrict ethernet and serial connectivity usage.
Failure to restrict Ethernet and communication access to the Liquid Ultrasonic Meter can
result in, among other things, unauthorized access, system corruption, and/or data loss.
User is responsible for ensuring that physical access and Ethernet or electronic access to the
Series 100 Option Board is appropriately controlled and any necessary security precautions,
such as, establishing a firewall, setting password permissions and/or security levels are
implemented.