Reference, Installation, and Operations Manual Section 5: Startup and meter configuration
3-9000-743 Rev S June 2013
Current Outputs Page 143
Full scale mass rate:
Series 100 Option Board
Series 100 Plus Option Board
(if installed)
Data points affected:
• AO1FullScaleMassRate
• AO2FullScaleMassRate
Options:
• Enter a mass rate (kg/hr or lbm/hr)
Guidelines
• This point is only used when the analog output content is mass
rate.
• This point specifies the mass rate associated with the maximum
current (20 mA).
• For options and guidelines, see Section 6.2.3 and Daniel
MeterLink online help.
Alarm Action:
Series 100 Option Board
Series 100 Plus Option Board
(if installed)
• AO1ActionUponInvalidContent
• AO2ActionUponInvalidContent
Options:
• High (0)
• Low (1)
• Hold Last Value (239)
• Very Low - 3.5 mA (240)
• Very High - 20.5 mA (241)
• None (251)
Table 5-15 Data Points for Analog (Current) Output Configuration
Daniel MeterLink
Display Name
Data Points, Options and Guidelines