118 Writing changes while connected to the meter
Section 5: Startup and meter configuration Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
5.5.3 Writing changes while connected to the meter
To configure a communications port on the flow meter that is connected (currently in-use) use
the
Meter>Communications Settings menu path. The Communications Settings Connected to
meter’s Ethernet port dialog displays.
Figure 5-5 Writing Ethernet port communications settings
The dialog identifies the following:
• Former and new communications parameters for the port
The dialog also offers these options for writing configuration changes to the flow meter, then
reconnecting:
• Update meter directory record with these settings and reconnect
• Create new meter directory record with these settings and reconnect
• Disconnect from meter after writing changes