Filter
Top Products
Reference, Installation, and Operations Manual Section 5: Startup and meter configuration
3-9000-743 Rev S June 2013
Set Baseline Wizard 159
5.6.16 Set Baseline Wizard
Use the Tools|Set Baseline Wizard command in Daniel MeterLink 5 to configure the baseline
options (see Table 5-1). The Baseline Viewer is used to view the meter’s flow characteristics
including: Flow Velocity, Profile Factor, Swirl Angle, Symmetry, Cross-flow, and Path
Turbulences. This dialog is available from the Monitor screen when a valid Continuous Flow
Analysis key is entered in the Key Manager. Select the
Baseline button on the Meter Monitor
page to access the Baseline Viewer.
Figure 5-19 Meter Monitor - Baseline Viewer