Filter
Top Products
172 Maintenance logs and reports (Logs/Reports Menu)
Section 5: Startup and meter configuration Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
2. Click the Start button and the Log File Pathname dialogs appears.
Figure 5-23 Log file pathname
You may choose a name for the Maintenance log or use the default name based on the
Meter Name and PC date and time that is suggested. Change the name or default
location if desired and click the
SAVE button to apply your changes. The Log file shows
the file and location of the Maintenance log being generated.
3. Daniel MeterLink begins to collect the information requested from the meter. Time
Remaining shows the time left in the data collection period in a
Day: Hour:Minute:Second format. A progress bar at the bottom of the dialog shows the
progress for each record being collected. The table is updated after each record is
collected (see Figure 5-22).