132 Startup page
Section 5: Startup and meter configuration Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
5.6.5 Startup page
In Daniel MeterLink, to begin the meter configuration, use the Meter|Field Setup Wizard menu.
The
Field Setup Wizard - Startup page displays first. If your meter has the Series 100 Option Board
installed, see Figure 5-7. If your meter has the Series 100 Plus (HART®) Option Board installed,
see Figure 5-8.
Figure 5-7 Field Setup Wizard - Startup Page (Series 100 Option Board)