Filter
Top Products
48 Using appropriately rated lifting slings on Daniel Ultrasonic Meters
Section 3: Installation Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
3.2.4 Using appropriately rated lifting slings on Daniel Ultrasonic
Meters
The following instructions are intended to provide general guidelines for proper slinging of a
Daniel Ultrasonic meter by itself. They are intended to be followed in addition to your
company's standards or the DOE-STD-1090-2004 HOISTING AND RIGGING standard if such
company standards do not exist.
Safety precautions using appropriate rated lifting slings on Daniel
Ultrasonic Meters
Read and follow the Safety Precautions listed below:
1. Meters must only be lifted by personnel properly trained in the safe practices of rigging
and lifting.
2. NEVER attempt to lift the meter by wrapping slings around the electronics.
Table 3-3 Hoist ring lookup table for Daniel Gas JuniorSonic Meters
ANSI 300 ANSI 600 ANSI 900 ANSI 1500 Daniel Part Number
4” to 12” 4” to 8” 4” to 8” 4” to 6” 1-504-90-091
16” to 18” 10” to 16” 10” to 12” 8” to 10” 1-504-90-092
20” to 30” 18” to 20” 16” to 20” 12” 1-504-90-093
36” 24” to 30” 24” 16” to 20” 1-504-90-094
36” 30” to 36” 24” to 36” 1-504-90-095