Filter
Top Products
Reference, Installation, and Operations Manual Section 3: Installation
3-9000-743 Rev S June 2013
How to obtain safety engineered swivel hoist rings 47
3.2.3 How to obtain safety engineered swivel hoist rings
The following is a list of manufacturers of approved safety engineered hoist rings:
• American Drill Bushing Company (www.americandrillbushing.com
)
• Carr Lane Manufacturing Company (www.carrlane.com
)
The following is a list of known suppliers that can supply these safety-engineered hoist rings.
This is not intended to be a complete list.
• Fastenal (www.fastenal.com
)
• Reid Tools (www.reidtool.com
)
The appropriate hoist rings can also be purchased directly from Daniel. The following table
provides part numbers for reference:
What size safety engineered swivel hoist ring do you need
To determine the size of the hoist rings required for your meter, use the appropriate table below.
Look down the column that matches the ANSI rating of your meter. Find the row that contains
your meter size. Follow the row to the end to find the appropriate hoist ring part number.
Table 3-1 Daniel hoist ring part numbers
Daniel Part
Number*
Hoist Ring Thread Size &
Load rating
American Drill
Bushing Co. P/N*
Carr Lane Manufacturing Co.
P/N*
1-504-90-091 3/8"-16UNC, 1000 lb. 23053 CL-1000-SHR-1
1-504-90-092 1/2"-13UNC, 2500 lb 23301 CL-23301-SHR-1
1-504-90-093 3/4"-10UNC, 5000 lb. 23007 CL-5000-SHR-1
1-504-90-094 1"-8UNC, 10000 lb. 23105 CL-10000-SHR-1
1-504-90-095 1-1/2"-6UNC, 24000 lb. 23202 CL-24000-SHR-1
* The part numbers include only one hoist ring. Two hoist rings are required per meter.
Table 3-2 Hoist Ring lookup table for Daniel Gas SeniorSonic Meters*
ANSI 300 ANSI 600 ANSI 900 ANSI 1500 Daniel Part Number
4” to 10” 4” to 8” 4” to 8” 4” to 6” 1-504-90-091
12” to 18” 10” to 16” 10” to 12” 8” to 10” 1-504-90-092
20” to 24” 18” to 20” 16” to 20” 12” 1-504-90-093
30” to 36” 24” to 30” 24” 16” to 20” 1-504-90-094
36” 30” to 36” 24” to 36” 1-504-90-095
*4” to 6" 45 degree meters and 8” to 36" 60 degree meters