128 Meter configuration using Daniel MeterLink
Section 5: Startup and meter configuration Reference, Installation, and Operations Manual
June 2013 3-9000-743 Rev S
Current Outputs Page The Current Outputs Page allows you to configure the current outputs. This page is only displayed
if the Current outputs was selected on the Startup Page. Properties on this page are individually
disabled according to selection made on the Startup Page.
• Content:
Uncorrected (Actual) flow rate
Corrected (Standard) flow rate
Average Flow Velocity
Average Sound Velocity
Energy Rate
Mass Rate
• Direction:
Reverse
Forward
Absolute
• Volumetric flow
Full scale volumetric flow rate
• Velocity
Maximum scale velocity
Minimum scale velocity
• Energy Rate
Full scale energy rate
• Mass Rate
Full scale mass rate
• Alarm action:
High -20 mA
Low - 4 mA
Hold last value
Very low- 3.5 mA
Very high - 20.5 mA
None
Table 5-11 Daniel MeterLink Field Setup Wizard
Page Description