Filter
Top Products
KLVHS001–KLVSC009 69
System Action: One of the following:
Action 1. Error recovery displays the TERMINAL INPUT ERROR message on
the terminal. The input message is rejected with an appropriate sense code
and normal processing resumes.
Action 2. Error recovery ignores the input message and normal processing
resumes.
User Response: One of the following:
If the TERMINAL INPUT ERROR message displays, press ENTER to remove
the message and continue normal operation. If the problem persists, the
system administrator should obtain a VSSTRACE of the failure and a copy of
any related error messages and contact Candle Customer Support.
If the TERMINAL INPUT ERROR message displays, press ENTER to remove
the message and continue normal operation. If the problem persists, the
system administrator should analyze the failure and contact the appropriate
hardware or software vendor.
Message Type: INFO.
KLVPM051 KLVINPSM RKANPAR PARAMETERS:
Explanation: Module KLVINPSM logs its start-up parameters as they are read
from RKANPAR. This is the header message and will be followed by message
KLVPM052.
System Action: None.
User Response: None.
Message Type: LOG.
090E Internal Exception Condition 2 1
090F Internal Exception Condition 2 1
0910 Internal Exception Condition 2 1
0911 Internal Exception Condition 2 1
0912 Internal Exception Condition 2 1
0913 Unexpected formatted input (error_data=buffer
address)
22
0914 Input data from unknown field
(error_data=buffer address)
22
0915 Attention key received during pre-popup read. 2 2
0916 Read modified already satisfied. 2 2
Table 1. Description of reason codes for KLVPM021
Reason
Code Description
System
Action
User
Response