Filter
Top Products
468 Candle Products Messages Manual (KLVHS–KONCT)
System Action: Further communication with the product may not be possible.
User Response: Examine the POVI log for more detailed messages describing
the problem.
Message Type: LOG.
KOGRU002 SCREEN SIZE PROBLEM WITH ROWS=xx, COLS=yy
Explanation: An internal logic error occurred.
System Action: Further communication with the product will not be reliable.
User Response: Examine the POVI log for more detailed messages describing
the problem.
Message Type: LOG.
KOGRU003 WAITING FOR sessid ACTIVATION nn SECONDS AT luname
Explanation: The session for sessid has been started but is not yet active.
System Action: POVI continues waiting for the session to become active.
User Response: Investigate the cause of the slow response or the inability to
use the associated application.
Message Type: LOG.
KOGRU004 VIRTUAL SESSION ACTIVATION TIMEOUT {LU(luname) SESSID(sessid)}
Explanation: POVI timed out waiting for the specified session to become active.
System Action: The session will not be started with the application.
User Response: Investigate the cause of slow response or the inability to start
sessions with the associated application. If the cause is slow response, which might
be expected, consider adjusting POVI Virtual Session timeout parameters.
Message Type: LOG.
KOGRU005 MONITORING HAS BEGUN FOR SESSION sessid FOR luname
Explanation: A started session has become active and is ready for use by the
product.
System Action: None.
User Response: None. This is an informational message only.
Message Type: LOG.
KOGRU007 luname WAITING FOR nn SECONDS FOR sessid, LAST RC=rc
Explanation: The application associated with sessid is not responding.
System Action: POVI continues to wait for a response from the associated
application.
User Response: Investigate the cause of slow response or the lack of any
response from the application.
Message Type: LOG.
KOGRU011 COMMUNICATIONS ERROR. FUNCTION=PSMIMP RC=rc {LU(luname)
SESSID(sessid)}
Explanation: A communications error occurred so that application data could
not be forwarded to the product.