Filter
Top Products
160 Candle Products Messages Manual (KLVHS–KONCT)
KM2HDI99 CANSM2HD FAILED
KM2HDI99 REASON (xxxx) SESSION (xxxxxxxx) HANDLE (xxxxxxxx)
Explanation: The historical data interface is terminating after detecting a
non-recoverable condition. These two messages are produced together in the
order shown. The reason code defines the problem for the user. The SESSION and
HANDLE values are the CANSM2 session handle and cross memory handle,
respectively.
System Action: The task is shut down.
User Response: Remedy the error condition and restart the region. If the error
persists, call Candle Support. Please have the sysout from both this task and the
associated CANSM2 task available for reference.
Note that in the reason codes listed below, the first digit may or may not be an 8.
(An 8 at the beginning is a secondary indicator that helps Candle Customer
Support determine which routine issued the return code.)
REASON CODE DESCRIPTION
0004 The CANSM2HD side has reset itself.
0008 CANSM2HD not ready to handle caller.
000C Error state.
0010 Bad handle detected.
0014 Bad entry code.
0018 SSCVT value already in use.
001C Unexpected return code from IEFSSREQ.
0020 SSCTSUSE contains zero.
0024 Invalid communication between CANSM2HD and CANSM2.
0028 GETMAIN failed.
002C GETMAIN failed.
0030 FREEMAIN failed.
0034 Inquire failed.
0038 WAIT failed.
003C POST failed due to zero ECB pointer.
0040 POST failed due to bad ASCB.
0044 POST failed due to missing ASCB.
0048 SUSE is too small to use.
004C Not APF authorized.
0080 Invalid handle.
0084 Invalid function code.
0088 GETMAIN failed.
008C Invalid service number to send.