Filter
Top Products
156 Candle Products Messages Manual (KLVHS–KONCT)
User Response:
Message Type: INFO.
KLXIN006 TCP/IP INTERRUPT UNKNOWN: IPTYPE(iptype) IPPATHID(ippathid)
Explanation: None.
System Action: None.
User Response: None.
Message Type: WARN.
KLXIN007 TCP/IP PATH SEVERED: IPPATHID(ippathid)
Explanation: None.
System Action: None.
User Response: None.
Message Type: WARN.
KLXIN008 TCP/IP PATH NOT FOUND: IPTYPE(iptype) IPPATHID(ippathid)
Explanation: None.
System Action: None.
User Response: None.
Message Type: WARN.
KLXIN009 HPNS INITAPI FAILED: RC(FFFFFFFF) ERRNO(000003F3)
Explanation: A request to contact TCP/IP using the HPNS API has failed with
the noted IBM status information. This is most likely caused by a misconfigured
KLXINTCP member in RKANPAR.
System Action: None.
User Response: If no TCP/IP access is desired, delete KLXINTCP from
RKANPAR.
KLXIN009 HPNS INIAPI FAILED <RC(9999) ERRNO(9999)>
Explanation: The HPNS interface is the High performance, Native Socket
interface. Both IBM and Interlink support the HPNS interface through the
EZASMI macro. This message indicates that the HPNS interface has failed (the
EZASMI TYPE=INITAPI has failed). The resulting errno should be examined for
the cause of failure.
System Action: The HPNS interface is no longer available. TCP/IP access is
not available to the application.
User Response: make sure the KLXINTCP member of RKANPAR contains the
correct TCP/IP stack identifier.
TCP/IP This message is informational.
For Interlink -
TCP/ACCESS
This message indicates the KLXAINIT member of RKANPAR is
missing. If TCPACCESS/Interlink support is desired, add member
KLXAINIT containing the name of the Interlink subsystem to the
RKANPAR data set.