Filter
Top Products
KMQxx001E–KOCJ0046 347
KN3CV080 NAVIGATION NOT ALLOWED
Explanation: The user attempted to navigate to a panel that is already active in
the stack. As navigation takes place from the Status Display panel, the display
panels are stacked so that as you press F12, you can return up the stack.
System Action: None.
User Response: Choose another selection or press F12 until you return to the
panel you wish to view.
Message Type: Information.
KN3CV081 NEW RACHSRT PARAMETER IS NOT PRIME
Explanation: When using the SRT modeling, a number was entered that is not
prime.
System Action: None.
User Response: None.
Message Type: Information.
KN3CV082 LIGHT PEN IS NOT SUPPORTED
Explanation: The user attempted to use a terminal light pen.
System Action: None.
User Response: Do not use a light pen with OMEGAMON II.
Message Type: User input error.
KN3CV083 TRACE ALREADY ACTIVE OR COMPLETED
Explanation: The user attempted to start a VTAM trace that is either already
started or has already completed.
System Action: None.
User Response: Add and start a new trace.
Message Type: User input error.
KN3CV084 TRACE IS STILL ACTIVE
Explanation: The user attempted to save a VTAM trace that is either active or
wrapping.
System Action: None.
User Response: Traces that are either ended or manually stopped can be
saved.
Message Type: User input error.
KN3CV085 TRACE IS ALREADY SAVED
Explanation: The user attempted to save a trace that has already been saved.
System Action: None.
User Response: None.
Message Type: User input error.
KN3CV086 TRACE WAS NEVER STARTED
Explanation: The user attempted to save a trace that was never started.
System Action: None.
User Response: Start the trace and let it complete before attempting to save it.
Message Type: User input error.