Filter
Top Products
418 Candle Products Messages Manual (KLVHS–KONCT)
KN3PN029 OMEGAMON II for DB2 FOR VTAM INTERNAL FUNCTION LEVEL
SECURITY ENABLED
Explanation: OMEGAMON II for VTAM is configured to use an internal facility
to control access to certain product functions.
System Action: None.
User Response: None.
Message Type: Confirmation.
KN3PN030 MEMBER mbr_name NOT FOUND IN RKANPAR
Explanation: An error occurred during the configuration of external function
level security.
System Action: Initialization continues using internal facilities to control access
to product functions.
User Response: Review configuration steps for function level security. If the
problem cannot be resolved, contact Candle Support Services.
Message Type: Error.
KN3SD001 SDM LOGON INITIATED FOR PRODUCT(SDM_product) —
SESSION(SDM_session_name) SDMAPPL(SDM_applid)
SYSTERM(SDM_luname) REFRESH(SDM_refresh_interval)
TRIGGER(SDM_hot_key)
Explanation: A message indicating an SDM (Status Data Manager) session has
been established between an SDM product (OMEGAVIEW or Status Monitor)
and OMEGAMON II for VTAM.
The parameters have the following meaning:
System Action: None.
User Response: None.
Message Type: Information.
SDM_product Product that establishes the SDM session: OMEGAVIEW or
Status Monitor.
SDM_session_name Name assigned to this session by the SDM product.
SDM_applid Applid defined in the SDM product with which
OMEGAMON II for VTAM can establish a session to emit
SDM status to the SDM product.
SDM_luname Name of LU that has established the session with
OMEGAMON II for VTAM.
SDM_refresh_interval Auto-update interval requested by the SDM product.
SDM_hot_key Key used to return to the SDM.