Filter
Top Products
KMQxx001E–KOCJ0046 245
KMQCI309I REMOTE MQ MANAGER mgr IS MONITORED VIA ROUTE LOCAL
MANAGER mgr
Explanation: The KMQCMD DISPLAY SETTINGS command is showing that
the specified remote manager is monitored using a connection with the specified
local manager.
System Action: None.
User Response: None. This is an informational message only.
KMQCI310I TOTAL NUMBER OF MONITORED QUEUES IS nnnnnnnn, TOTAL
NUMBER OF MONITORED CHANNELS IS nnnnnnnn
Explanation: This message is issued in response to the DISPLAY SETTINGS
command if the MGRNAME was specified. It displays the number of queues and
channels monitored for the specified queue manager.
System Action: None.
User Response: None. This is an informational message only.
KMQCI311I ROUTE(route_list)
Explanation: The KMQCMD DISPLAY SETTINGS command is continuing to
display information about a GROUP or RMANAGER by showing the ROUTE list
which has been set.
System Action: None.
User Response: None. This is an informational message only.
KMQCI312I RUSERID(remote_userID)
Explanation: The KMQCMD DISPLAY SETTINGS command is continuing to
display information about a GROUP or RMANAGER by showing the remote
userID that has been set.
System Action: None.
User Response: None. This is an informational message only.
KMQCI313I REPLYTOQMGR(manager_name)
Explanation: This message is one of several possible messages given in
response to a KMQCMD DISPLAY SETTINGS command. It gives the
REPLYTOQMGR name specified for the group or remote queue manager being
addressed by the response.
System Action: None.
User Response: None.
KMQCI315W MQ MANAGER (manager_name) IS ACTIVE BUT NOT MONITORED
BECAUSE reason_text
Explanation: This message is issued in response to the DISPLAY SETTINGS
command if the queue manager name is active but monitoring failed. The
reason_text can be one of the following:
1.NO SET MANAGER BLOCK WAS FOUND
2.MONITORING IS INITIALIZING
3.MONITORING IS BEING TERMINATED
4.INVALID SET MANAGER BLOCK WAS FOUND
5.SET MANAGER BLOCK WAS IN USE